How much did I earn in September 2025?
Nothing much happened, earnings a bit low for last month.
Looked at the errors on my website, checked my awstats. Turns out that my traffic has 2/3x increase in volume when reviewing my awstats data.
I’ve also recently became an eBay Ambassador, have my own “Storefront on eBay” now. This is useful because anything I find useful I can now link to in the store for content rather than in the articles themselves.
I’ll find this useful too since linking into the products is also affecting my site traffic because it affects the scores
My affiliate earnings for September 2025
| NETWORK | EARNINGS | COMMENTS |
|---|---|---|
| Google Adsense | £4.53 (£62.21) | Rolling balance |
| eBay Partner Network | £0.82 | Commision earnings |
| Amazon Affiliates | £0.12 (£19.56) | Rolling balance |
| Awin | £0.00 | |
| Newsflare | £0.00 | Abandoned Youtube, better results with Newsflare |
| Shopping Receipts | £0.00 | Amazon Shopper Panel |
| Amazon KDP | £0.00 | |
| Virgin Broadband | £0.00 | Pending |
| Virgin Broadband | -£100.00 | Missing payment |
Total Earnings for September 2025
£4.65
Monthly admin thoughts
Carried out the repair on my radiator of my Audi A3 this month, due to the leakage
I also carried out a repair on the household toilet because the flushing mechanism wasn’t working. This was simply because the seal had failed on the siphon valve. Easy enough repair. I used the opportunity to learn a new skill.
Finally, in terms of my 1U pfSense server project I’ve come to a standstill. The clamp idea I had worked, but didn’t form a good enough bond to create a continuous circuit. The final and last resort I’m going to try is soldering PFC connectors directly onto the PCI expansion cards, and using this as a quick connect for the cables. I know the connection method works for soldering, because I did it initially on wires, it’s just I found it would be a tedious, and slow boring procedure. I do however now have some flux and a hot air station. So I may try and use some genuine Amtech-559 Flux with the hot air station to see if it can help solder the connection directly to the boards. Just waiting for them to arrive now
